Изравнителна платформа G4 ramp pcg4

Dock Leveller mod. G4A / B, made of steel, electro-hydraulic, self-leveling with dead man cycle. Concrete housing compartment to be built in reinforced concrete. and suitable to allow the total recovery of the platform. Capacity with load concentrated on the trolley wheels and tipping front sector resting on the vehicle body kg. 6000 Capacity with static and distributed load with platform in locked rest position kg.10.200 Working range from magazine level +10% / -8% Ramp pack height (version with rotating flap) mm. 550 approx. Electro-hydraulic equipment located on the base frame, with 380 V power supply. Buffers in solid rubber 150 x 100 x 300 h mm complete with plates, screws and bolts for fixing; N ° 1 button + stop / disconnector, incorporated in the door of the electrical panel (dead man operation) Semi-automatic cycle - A: Up / Open - B: Up / Close - C: Leaving the button, the ramp leans against the vehicle body / resting place; Conservative treatment (standard) by brushing, degreasing the oxidized parts, painting with a coat of anti-rust, plus one of RAL 5010 BLUE enamel and yellow-black stripes on the two sides. In the estimate a quay with a height of about 1,100 / 1,200 mm was assumed. a) PLATFORM with TELESCOPIC FLAP Dimensions 2.000 x 2.500 mm + 500 mm of Flap b) Self-supporting castle, equipped with a compartment for the shelter of the hydraulic side of the vehicle, protective side parapets, push-button panel-holder column and abutments with adjustment screws for the correction of the difference in height between the yard floor and the quay level, carpentry support for "delta" rubber buffers applied to the two sides of the ramp, 300 x 300 x 10 mm metal plates to allow the distribution of floor loads,