Кръглошлифовъчна машина Kellenberger KEL-VARIA UR175-1000 BEMA 12-3















Ако сте решили да купувате техника на ниска цена, уверете се, че общувате с реален продавач. Съберете колкото се може повече информация за собственика на техниката. Един от начините за измама е да се представяш за реално съществуваща фирма. Ако имате някакви подозрения, съобщете ни за това за допълнителен контрол с помощта на формуляра за обратна връзка.
Преди да решите да купите нещо, внимателно проверете няколко оферти за продажба, за да разберете средната стойност на избрания от вас модел на техниката. Ако цената на офертата, която сте си харесали е много по-ниска от подобните оферти, не бързайте, помислете. Значителната разлика в цената може да означава скрити дефекти или опит на продавача да извърши мошенически действия.
Не купувайте стоки, цената на които прекалено много се различава от средната цена на подобна техника.
Не давайте съгласие за съмнителни залози и авансово плащане на стоката. Ако имате някакви съмнения, не се страхувайте да уточнявате подробностите, искайте допълнителни снимки и документи на техниката, проверявайте достоверността на документите, задавайте въпроси.
Това е най-разпространеният вид мошеничество. Нечестните продавачи могат да поискат определен аванс за „резервиране” на правото ви за закупуване на техниката. По този начин мошениците могат да съберат голяма сума пари, да изчезнат и да не отговарят повече.
- Превод на авансовото плащане по карта
- Не внасяйте авансовото плащане без да оформите документи, потвърждаващи процеса на предаване на парите, ако при общуването ви с продавача той предизвиква съмнения.
- Превод по сметка на фирма с подобно име
- Бъдете внимателни, мошениците могат да се маскират като известни фирми чрез незначителни промени в названието. Не превеждайте пари, ако названието на фирмата предизвиква съмнения.
- Превод по сметка на фирма с подобно име
- Бъдете внимателни, мошениците могат да се маскират като известни фирми чрез незначителни промени в названието. Не превеждайте пари, ако названието на фирмата предизвиква съмнения.
- Въвеждане на собствени реквизити във фактура на реална фирма
- Преди да преведете парите, проверете дали посочените реквизити са правилни и дали те се отнасят към посочената фирма.
Информация за контакт с продавача

Base:
Kellenberger Kel-Varia UR175-1000 Kelco 120
Grinding head UR with T1-T2-T3
Basic equipment:
-T1 500mm grinding disc diameter
-T2 400mm grinding wheel diameter
-Infinitely variable, high-resolution axis
-Marposs measuring device for tool measurement
-Active longitudinal positioning
-GAP on T1 and T2 from ELASO contactless integrated in the control interface
Semi-automatic balancing from ELASO integrated into the control interface
-Tailstock with manual retraction
-MK5 workpiece headstock with short taper DIN 55026
Belt-driven internal grinding device
Options at an extra charge:
- New high-precision workhead with torque drive
- Internal grinding device for high-frequency spindles diameter 120mm
-HF internal grinding spindle Fischer MFM-1224/42/31
re.HJND-21
-HF spindle with HSK holder 24,000 rpm with
integrated GAP sensor. (delivery time)
-CNC-controlled C-axis
non-circular grinding
-hydrostatic threaded spindle in x
-new hydrostatic unit with only 1 pump and pressure accumulator
thus better energy efficiency.
-monitoring of the water content in the hydrostatic system
-Suction system
Further options available on request
Mechanical overhaul:
-Complete machine overhauled according to Kellenberger measurement protocol
-New service-friendly cab
-repainting
Electrical overhaul:
-New modern CNC CIRCULAR GRINDING MACHINE control with
BEMA rough grinding surface
-New control cabinet
-New drive technology
-Replacement of all electrical cables Berus pressure switches etc.
-New absolute glass scales in x and z
-New absolute rotary encoder (for B-axis)
Control system:
The grinding software consists of a basic licence and various options that are
possible depending
depending on the equipment of the machine.
Basic software
- External and internal pendulum grinding
- External and internal plunge-cut grinding
- External and internal pendulum grinding
- External and internal plunge-cut grinding
- External and internal taper pendulum grinding
- External and internal radius grinding, radius dressed on disc
- Semi-automatic pendulum grinding
- Workpiece zeroing
- Grinding wheel zeroing
- Measuring the dressing diamonds
- 2 moulding diamonds
- 1 shaped diamond or dressing roll (dressing roll required)
- Moulding roller (dressing roller required)
- 3 Flat dresser
- Corrections
- Z-position measurement (probe required)
- GAP probing (grinding device required)
OPTIONS at an extra charge:
Software profile plunge-cut grinding:
- External and internal profile plunge-cut grinding with profile disc
Profile grinding software:
- External and internal profile grinding with straight disc
Software thread grinding:
- Single and multi-start external and internal thread grinding with thread on
the disc
disc
Dressing. Dressing of single and multi-groove discs. Flank angle freely
selectable.
Trapezoidal thread grinding software:
- Additional dressing of trapezoidal threads possible
External and internal non-circular plunge-cut grinding:
- External and internal non-circular plunge-cut grinding
Non-circular grinding software:
A prerequisite for non-circular grinding is that the workpiece axis is equipped
with a high-resolution rotary encoder so that the axis can be operated as a C-
axis.
can be operated as a C-axis.
The non-circular profile can be drawn on the control unit or imported as a dxf
file.
can be imported.
Type of control: CNC
Storage location: 73230 Kirchheim
Country of origin: Switzerland
Delivery time: 20 weeks
Freight basis: EXW
grinding diameter: 350 mm
grinding length: 1000 mm
centre height: 175 mm
dimensions of the machine ca: 3,6/3,5 m