Лентова шлифовъчна машина Timesavers 41 series 900

Used Time Savers 41 series 900 metal finishing
1.2 MACHINE SPECIFICATION
Working width: 900mm
Abrasive belt 1900 x 930mm
Machine execution in conformance with CE
Front pressure rollers with over thickness safety
1st Head
Contact roller head Ø 180mm (7.09 inches)
Contact roller 35° Shore NI grooved
Electronic oscillation
Fine-adjustment (7mm) of contact roller with rise and fall
Dial indicator on roller head
Speed 10-22m/s
2nd Head
Disc Ø 1220mm
Motorized height adjustment (80mm)
Frequency controlled motor 6.9kW
Speed10-22m/s
Feed
Vacuum conveyor table
fixed
Conveyor belt oil- and heat resistant
flat profile
Belly brake
Conveyor motor 1.3kW frequency-inverted
Feed speed 1-10m/min
Motorized height adjustment (0-80mm) of conveyor bed opening
frequency inverted
Jog switches to reverse feed direction
Wet Execution
Stainless steel doors and sheet material
Integrated filter
paper filter cloth (50grams/m2)
cooling liquid tank
410L
Spray nozzles
Centralized lubrication with nipples
Refractometer (coolant emulsion)
Water separator on top of the machine with 11kW pump
Belt-on Dryer
Double air knvies
Six squeeze rollers
Min. work piece size 80x80mm
400 V
50 Hz
Main switch
5 emergency stops
Machine operation: E1070 Mitsubishi control panel
Introduction
The model 41-SERIE-900-WRD is only suitable for
Deburring laser cut or punched parts
(Partial) rounding
(top) finishing
The parts to be processed must have the following properties
Flat
Equal thickness per adjustment
Stainless steel
(zinc coated) steel
aluminium
may be foiled
8 – 20mm thick
Sizes 80 x 80mm smallest
maximum width = width of conveyor belt
Aspect ratio (thickness – width) at least 1:3
Weights maximum 500 kg
Ideal for laser
waterjet and plasma cut parts
For service or inquiry about this manual please contact your dealer